Fern Wifi Cracker | Hacking WiFi Networks Using Fern Wifi Cracker Easily

Fern wifi cracker is a GUI software used to crack wifi passwords, Fern wifi cracker can hack wifi WEP passwords very easily but it a little bit difficult to hack WPA OR WPA2. So, here is a tutorial on hacking WPA & WPA2 passwords easily in Linux based operation systems by brute forcing the handshake file of the target router captured by fern wifi cracker. Fern wifi hacker has a lot of inbuilt features required to hack any kind of wifi network. Main features include capturing the handshake and brute forcing it automatically, cracking WPA WPA2 - WPS turned ON routers, WEP cracking, saving the cracked passwords and much more. Explore Fern Wifi Hacker to get to know more about it. 


1)    Kali Linux – Operation System In Your System Or In Your Flash Disk (USB Pendrive)
2)    4GB or Above Pendrive
3)    Word List - 
4)    Wifi networks near by with Excellent Signal to make hacking faster


     1)      Click Here to download Kali Linux

Here Are the Links to Download Word lists - One Is Enough, but here are few links at your disposal. or else you can Learn How to create Wordlist or Download it through these links Download 1 Download 2 Download 3 Download 4

Why I prefer using Live Boot rather than installing Kali Linux on a Virtual Machine is virtual machines cannot use internal wifi adapters. Just to try this hack you need to purchase an external wifi adapter which might be a waste of money, but if you can purchase an external wifi adapter hacking the process goes much faster because of their range and speed of capturing. It’s up to you weather to buy an external wifi adapter or install kali in your USB drive & use your internal wifi adapter.  

Hacking Wifi Using Fern Wifi Cracker:
You might be wondering how this process work? In layman terms fern wifi cracker captures a handshake (handshake is the negotiation between your system and the router) and saves it in a file. A wordlist should be provided to the fern wifi cracker manually, then fern wifi cracker performs a brute force attack (a trial and error method used by application programs to decode encrypted data such as passwords). If the password in the wordlist file matches with the hash in the handshake file, Positive result is shown, saying Password cracked or else you need to try a different wordlist. 

How To Hack Wifi - WPA & WPA2 Network Easily Through Fern Wifi Cracker In Kali Linux

This is one of the easiest way to crack wifi wpa/wap2 network without typing any commands. Everything is made easy with fern wifi cracker, which is one of the most widely used tools for cracking wifi networks. Fern Wifi cracker is mostly used for brute forcing a handshake file. 

Running Fern Wifi Cracker:

Step 1. Go to Kali Linux--> Wireless attacks 802.11 wireless tools-> Fern-Wifi-Cracker

Searching for Access Points:

Step 2. Select the Interface “Wlan0” and click on “Scan for Access Points

Step 3. You need to wait till it shows the “Active” Status

Targeting the Network:

Step 4. Let’s try Hacking WPA/WPA2 security, you might find wep, wpa, wpa2 and wps enables networks. You can try cracking other kind of security technology with fern wifi cracker. It may or may not work, varies with encryption & algorithms as well. What we are trying to do now is a simple brute force attack. Fern wifi cracker is effective for wep attacks and wpa bruteforce attacks.

Browse the Wordlist:

Step 5.  Select the network that you want to hack

Step 6. Click on “Browse” to select the wordlist to brute force.

Attacking the Network:
Step 7. Click on Attack and wait until the attack starts. Fern wifi cracker captures a handshake file and then performs a brute force attack on the hand shake file. You can see the mac address of the target when a handshake file is captured.

Brute Forcing the handshake:
Step 8. Brute forcing is a process of trial and error, no one knows how long it takes to crack a network, but it mostly depends on the wordlist and CPU/GPU performance of your system. The higher your system configuration the faster is the hacking process.

Step 9. Once the attack is Succeeded, you can see the passwords in “Key Database

Step 10. If the hack is successful, you can view the password in key database. As shown in the fig

Well, that’s how you hack a wifi network very easily, this might not work in all cases, so here I will provide you with some links for hacking all kinds of wireless network securities. If You still face any issues regarding this, let me know in comments or you can send me an email.

Related Posts:

==========     Hacking Don't Need Agreements     ==========
Just Remember One Thing You Don't Need To Seek Anyone's  To Hack Anything Or Anyone As Long As It Is Ethical, This Is The Main Principle Of Hacking Dream
    Thank You for Reading My Post, I Hope It Will Be Useful For You

I Will Be Very Happy To Help You So For Queries or Any Problem Comment Below Or You Can Mail Me At Bhanu@HackingDream.net

Bhanu Namikaze

Bhanu Namikaze is an Ethical Hacker, Security Analyst, Blogger, Web Developer and a Mechanical Engineer. He Enjoys writing articles, Blogging, Debugging Errors and Capture the Flags. Enjoy Learning; There is Nothing Like Absolute Defeat - Try and try until you Succeed.

No comments:

Post a Comment